rwca.over-blog.com/
16 Février 2021
Then i removed the Vertex 2 SSD from the Macbook pro, put it back in the Mac Mini (reassembled it - god, that's a big pain!) and boot it again in recovery, only to see. Macbook keyboard shortcuts. Nothing, the disk is still not recognized by the system. A 120GB solid-state drive, compatible with mid-2011 MacBook Air, from Other World Computing. Newer Technology's tool kit for the same, which includes a T5 Torx screwdriver and the ever-elusive. When the SSD is not properly connected, it may not be detected. Reconnect the drive and then try again. Make sure that the SATA connector on the board does not contain debris, or is not damaged. Replace the SATA cable and try again. Connect the SSD to a different SATA Port and see if the drive is detected. Step 1: Open Disk Management as taught. Step 2: Find and right-click the SSD you want to initialize, and then click Initialize Disk. Step 3: In the Initialize Disk dialog box, select the disk (s) to initialize. You can select whether to use the master boot record (MBR) or GUID partition table (GPT) partition style. SSD not detected in disk utility and system info. The board suffered liquid damage but was cleaned by another repair store. These are the voltage I could measure. SSDPWRENL = 0v on R1431.
Apple has determined that a limited number of 128GB and 256GB solid-state drives (SSD) used in 13-inch MacBook Pro (non Touch Bar) units have an issue that may result in data loss and failure of the drive. 13-inch MacBook Pro units with affected drives were sold between June 2017 and June 2018.
Apple or an Apple Authorized Service Provider (AASP) will service affected drives, free of charge. Apple recommends having your drive serviced as soon as possible.
Apple will also send an email to customers, who registered their device with Apple, to let them know about this program.
Professional music studio software, free download. First check to see which 13-inch MacBook Pro you have. Choose About This Mac from the Apple menu () in the upper-left corner of your screen. Confirm your model is 'MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports).' If you have that model, enter your computer's serial number below to see if it is eligible for this program.
This program does not affect 13-inch MacBook Pro with Touch Bar or older 13-inch MacBook Pro models.
Your 13-inch MacBook Pro will be examined prior to service to verify that it is eligible for this program and in working order.
Prior to service, it's important to do a full back up of your data because your drive will be erased as part of the service process.
Since your computer will not be able to access the internet until after you do a restore, we recommend that you have another device, such as your iPhone, to view the Apple support article about restoring your data from backup.
Note: Any files that were already corrupted prior to service, cannot be restored.
Choose one of the options below to have your drive serviced.
If your 13-inch MacBook Pro has any damage which impairs our ability to service the drive, that issue will need to be resolved prior to service. In some cases, there may be a cost associated with the repair.
This worldwide Apple program doesn't extend the standard warranty coverage of the 13-inch MacBook Pro.
If you believe your 13-inch MacBook Pro was affected by this issue, and you paid for service, you can contact Apple about a refund.
The program covers affected MacBook Pro models for 3 years after the first retail sale of the unit.
I have a 15' Macbook Pro that is no longer under warranty. Back in October 2016, the original SSD hard drive failed. I bought another SSD to replace it and used time machine to restore my files without a problem. My drive failed again a week ago after displaying unusually behavior for several weeks, like crashing with few programs loaded or while browsing the internet. Then, one boot up, I saw the folder with the question mark. I could not even wipe the new drive in recovery mode with the disk utility because it would not show up. The only think I see is 'disk0' and under that, Mac OS X Base System which I know is not my new SSD given the size. It does not show up no matter what I do. I checked that the cable and SSD were in correctly etc.
Believing that the drive was faulty I bought ANOTHER ssd and installed it. Again I cannot get disk utility to recognize it so I can format and restore. I then bought the cable that attaches the SSD to the logic board thinking perhaps that was the problem, but still my SSD is not recognized.
What do I do to get my Mac to see the new SSD I have installed? I did not have this issue when I installed the first replacement. Painting my macbook. Would I even be able to get into the disk utility and recovery mode if this were an issue with the logic board or have I neglected something totally obvious here?
Thanks in advance for any advice!
MacBook Pro (Retina, 15-inch, Early 2013), SSD issue
Posted on
